基于参数化分析的柔性后缘优化设计

介绍了一种自适应柔性机翼后缘变形控制优化设计方法,该方法采用了由单个驱动器驱动的单块式分布柔性结构。该方法的关键在于设计一种合适的柔性后缘结构拓扑形式,使该自适应柔性机翼后缘能够达到精确的变形。阐明了柔性结构拓扑优化设计的数学模型,针对自适应柔性机翼后缘概念设计提出了基于参数化分析的拓扑优化设计方案,并进行了工程化圆整和尺寸优化。最终,通过非线性有限元分析和功能测试,验证了本文提出的柔性后缘优化设计方法的合理性。     

可变形翼战术导弹飞行动力学联合仿真研究

基于集中质量假设发展的一套适于可变形翼导弹的多体运动模型,以附加惯性项及快变气动参数的形式来反映弹翼变形对导弹动态特性的影响,涉及交叉求解不同弹翼外形对应的气动特性及运动方程.由此提出的一种基于Missile DATCOM与MATLAB/SIMULlNK的联合仿真方法,应用于典型轴对称导弹的变翼动态特性研究中,快速有效...     

基于超静定配平的机动载荷控制风洞试验

介绍了俯仰机动载荷减缓(MLA)在某运输类飞机缩比风洞试验模型上的应用,旨在通过风洞试验研究一种基于超静定配平原理的机动载荷控制方法。首先,对模型飞机纵向超静定配平方法进行了研究并从理论上揭示通过其减缓机动载荷的基本原理;然后,依据超静定配平原理设计了MLA控制律,通过反馈模型飞机等效过载驱动副翼偏转减小机翼载荷,同时偏转升降舵来保持飞机的俯仰机动性能;最后,依次实施了超静定配平试验,气动伺服弹性稳定性试验以及机动载荷减缓试验,分别用以确定MLA控制律参数,检查控制系统稳定性以及获取俯仰机动时的系统响应。试验结果表明:在MLA控制律作用下,机翼根部弯矩增量比MLA控制律关闭时减小了10%以上,而模型飞机的俯仰机动性能基本保持不变;MLA控制律的加入使控制增稳系统稳定性略有下降;通过超静定配平试验确定MLA控制参数的方法有效提升了MLA控制律设计可靠性,使翼根弯矩减缓量接近目标值。研究工作为运输类飞机的机动载荷控制设计与试验提供了一种可行途径。     

柔性机翼阵风响应与被动减缓研究

高空长航时无人机的机翼展弦比大、柔性较强,飞行过程中极易受到阵风的影响。文章以几何精确本征理论建立结构模型,耦合 Pitt-Peters动力入流理论建立柔性机翼非线性气弹模型,研究了柔性机翼阵风响应以及翼尖被动阵风减缓效应。采用空间 -时间平行的有限元离散方法,将气弹方程转化为一阶微分代数方程,Newton-Raphson和 Generalized-α算法分别用于静态变形和动态响应的求解,通过算例研究了离散阵风载荷下柔性机翼的阵风响应,结果表明翼尖被动阵风减缓装置对机翼变形有明显的减缓效果。     

飞机机翼着陆滑跑动态性能分析

飞机着陆滑跑过程中,机翼结构将受到较大的冲击作用和振动激励。为预判结构局部危险部位,给结构强度设计提供参考,需对机翼着陆滑跑过程中的动态性能进行分析。创新性地考虑了飞机滑跑速度和气动力的变化,为有限元计算提供可靠的外载输入,并合理设置约束条件,建立半机体有限元模型,降低计算规模。最后提取机翼各站位处的载荷响应峰值,做出动响应包线,预判结构局部危险部位,如机翼根部,为结构强度设计提供参考。     

后掠翼三维鼓包串激波控制参数的影响

针对跨声速后掠翼,三维鼓包串作为一种有效的减阻方式具有结构简单、高效及鲁棒性好等优点.利用全局优化算法探索了鼓包设计参数空间的整体特性,并对鼓包长度、三维鼓包展向设计参数对鼓包减阻效果的影响进行了研究,发现鼓包顶点位置和高度对阻力系数最敏感,三维鼓包的展向设计参数则对阻力系数不敏感,而鼓包长度和鼓包相对展长越长越有利于减阻.在此基础上开展了小后掠角自然层流机翼加3种不同类型鼓包串的优化研究,通过优化结果发现,增加优化后的三维鼓包串,可将小后掠角自然层流机翼阻力发散马赫数向后推移,并且鼓包平均长度和控制区越大,效果越好.三维鼓包串具有良好的局部控制特性,可用于局部较强激波的抑制.三维鼓包串对常规后掠翼波阻具有良好的控制效果,同时能够抑制激波诱导的机翼后缘气流分离.      

毫秒脉冲等离子体激励改善飞翼的气动性能实验

在来流速度为30m/s时,进行了毫秒脉冲介质阻挡放电等离子体激励改善飞翼气动性能的风洞实验.等离子体激励器布置在飞翼前缘,峰峰值电压为9.5kV时,放电的脉冲能量在0.1mJ/cm量级.通过六分量测力天平测力研究了脉冲激励频率和占空比对升/阻力系数、升阻比和俯仰力矩系数的作用效果.结果表明:等离子体激励可以有效改善飞翼大攻角气动特性;在最佳无量纲脉冲激励频率F+≈1时,临界失速迎角由14°提高到17°,最大升力系数提高10%;占空比对流动控制效果影响较大,减小占空比可以降低能耗,实验中最佳占空比为5%;俯仰力矩系数的变化表明施加等离子体激励改善了飞翼纵向静稳定性.      

Flapping wing micro-aerial-vehicle:Kinematics,membranes, and flapping mechanisms of ornithopter and insect flight

The application of biomimetics in the development of unmanned-aerial-vehicles (UAV) has advanced to an exceptionally small scale of nano-aerial-vehicles (NAV), which has surpassed its immediate predecessor of micro-aerial-vehicles (MAV), leaving a vast range of development possi-bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel-opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro-duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as com-pared to experimental analysis.     

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

A streamwise-body-force-model (SBFM) is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The val-idation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure perfor-mance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tun-nel test results. Results show that to reach the goal of rapid integrated simulation combining inter-nal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.